Conveyor Belt Repair

KK-FIX

by BOSWORTH

Clean. Fast. Reliable.

Clean. Fast. Permanent.

Conveyor Belt & Rubber Lagging Repair Kit

🔥 FIRE RETARDANT☿ MERCURY FREE✓ VERSION 2

PART NO: BSW-KKF-500

VIEW INSTRUCTIONS ↓DOWNLOAD MSDSBUILD YOUR KIT →

How It Works

KK-FIX Application Guide

Kit Contents

What's in the Bag

7
01

KK-Fix Polyether Compound (Part A)

Two-component polyether repair compound base — forms a permanent flexible bond

1 unit
02

Hardener (Part B)

Activator component — mix with Part A immediately before use

1 unit
03

Cleaning Solvent

Surface preparation solvent — removes oils, grease and contaminants

1 bottle
04

Reinforcing Fabric

High-strength textile reinforcement — embedded into repair compound

1 sheet
05

Protective Gloves

Chemical-resistant gloves for safe handling during mixing and application

1 pair
06

Spatula

Mixing and application tool — use for compound preparation and spreading

1 piece
07

Ready-to-Use Packaging

Pre-measured components — no weighing required, mix entire contents of Part B into Part A

1 kit

Instructions

Step-by-Step Guide

0 of 8 steps complete

Inspect the damaged area thoroughly. Using the included Cleaning Solvent and a clean lint-free cloth, remove all oil, grease, dust, rust, and surface contaminants from the repair zone and surrounding area. The surface must be completely clean and dry before proceeding.

Use in well-ventilated area. Avoid prolonged skin contact with solvent.

Tool

Kit Builder

Answer 4 questions. Get the exact kit recommendation for your repair — and a branded PDF to take to site.

1
2
3
4

WHAT TYPE OF DAMAGE?

Step 1 of 4

Safety

Safety Information

Hazards & Warnings

Flammable

Keep away from heat sources and open flame. Store below 30°C in a cool, dry place.

Health Hazard

May cause mild skin and eye irritation with prolonged or repeated contact. Wash affected areas immediately with soap and water.

Environmental Hazard

Toxic to aquatic organisms with potential for long-term adverse effects. Prevent product from entering drains, waterways or soil.

PPE & Disposal

Chemical-Resistant Gloves

Nitrile or neoprene gloves must be worn during mixing and application. Included gloves meet minimum requirement.

Eye Protection

Safety glasses or chemical splash goggles required. In case of eye contact rinse immediately with water for 15 minutes and seek medical advice.

Ventilation

Use in a well-ventilated area. In confined spaces respiratory protection is required.

Disposal

Dispose of cured material and empty containers in accordance with local regulations. Do not pour uncured compound down drains.

Emergency

First Aid

Skin

Wash with soap and water for at least 15 minutes.

Eyes

Rinse with clean water for 15 minutes. Seek medical attention.

Inhalation

Move to fresh air immediately. Rest and keep warm.

Ingestion

Do NOT induce vomiting. Seek immediate medical attention.

Gallery

In The Field

1 / 19
KK-Fix conveyor belt repair in the field — image 1

Specifications

Technical Data

Part NumberBSW-KKF-500
Compound TypeTwo-component polyether
Pot Life5–8 minutes at 20°C
Cure Time30–45 minutes (ambient)
Full Strength24 hours
Application Temp5°C – 40°C
CoverageUp to 500 cm² per kit
Flame RatingFire retardant
Mercury ContentMercury free (Version 2)
PackagingPre-measured, no weighing

Documentation

Data sheets & test reports

Safety Data Sheet (SDS)

Version 2 — Mercury Free · November 2025

PDF

MASC flammability test report

MASC 26-4549 · SANS 340 (2016) Ed 3, clause 5.3.2.1.1 a) & b) · issued 6 October 2025

Tested by Mining and Surface Certification (a SANAS-accredited test lab). The samples tested showed no flame, re-flame or smouldering and complied with the requirements. The report covers the samples submitted and applies within South Africa.

PDF

Test reports are reproduced in full and remain the property of the issuing body. For the current controlled documents, contact Bosworth.